Navigating PPP loan forgiveness

HomeCOVID-19Navigating PPP loan forgiveness
Scott Humphrey, CEO, WFCA

To help flooring retailers navigate the PPP Loan forgiveness process, the World Floor Covering Association (WFCA) has released the following guidance.

“As flooring retailers and contractors begin to open, they may find employees are resisting coming back to work. According to a recent study, 54% of U.S. employees are worried about exposure to COVID-19 at their job. In addition, with the extra $600 that an employee can collect under the Coronavirus Aid, Relief and Economic Security (CARES) Act, an employee can collect $1,000 a week or more of unemployment benefits. This may be more than their regular pay, adding another disincentive to returning to the job.

Unfortunately, employees refusing to come back to work can impact the amount of a Payroll Protection Program (PPP) loan that is forgiven. To maximize the amount of the loan forgiven, the employer must meet three requirements:

  1. 75% of the PPP loan must be used on payroll costs
  2. Each employee’s pay during the eight weeks must not be reduced by more than 25% of the employee’s pay during the most recent full quarter during which the employee was employed
  3. The average number of full-time employee equivalents paid during the eight weeks must be the same as the average number of full-time employee equivalents paid between February 15, 2019 and June 30, 2019 or January 1, 2020 and February 29, 2020. The employer gets to choose the comparison period. If you pay fewer employees during the eight-week period, the amount forgiven will be proportionately reduced. To determine the number of full-time employee equivalents you include part timers based on the amount they worked (e.g., five part-timer employees working one eight-hour shift a day equals one full-time employee).

This week, the Small Business Administration (SBA) issued new guidance that addressed this issue. The SBA stated that it will exclude “laid-off employees whom the borrower offered to rehire (for the same salary/wages and same number of hours) from the CARES Act’s loan forgiveness reduction calculation.” To have these employees excluded, the employer must make “a good faith, written offer of rehire and the employee’s rejection of that offer must be documented.” To document the refusal, an employer can send an email to the employee verifying their rejection of the rehire offer. Be sure to put both the written offer and the email confirming the rejection in the employees file; they will be needed when applying to have the PPP loan forgiven.

It is unclear how this exclusion will be applied. It appears that the calculations in item No. 2 (maintaining each employee’s pay level) and item No. 3 (comparing the number of employees) will not be applied in determining the amount of the loan to be forgiven for employees that refuse to return to work. It is not clear, however, if and how it will apply the 75% rule in item 1. Based on the primary purpose of the PPP loans—to maintain payroll—it is likely that 75% of the loan will still have to be used on payroll costs, whether or not there are the same number of employees.

With the rapid pace at which laws, rules and orders are being issued, the WFCA is working to keep members informed and updated regarding their opportunities and obligations during the COVID-19 crisis. The Association will also continue to provide important information that may impact members. In the meantime, please feel free to send your concerns or questions directly to jeffw@jkingesq.com and mperkins@lobbyit.com.

(Notice: The information contained in this update is abridged from legislation, court decisions, and administrative rulings, and should not be construed as legal advice or opinion and is not a substitute for the advice of counsel.)

Must Read

Retailers React: What steps have you taken to safeguard your business against a cyberattack?

Every two weeks, FCNews seeks out flooring retailers across the country to offer their advice on hot topics of the day. This week, we...

i4F’s Ceramic Click technology enters the market

Turnhout, Belgium—i4F has joined forces with the Akgün Group-Duratiles to bring a clickable floating floor installation system to the world of ceramics. The...

Wuxi Boda adopts Unilin’s Matte Bevel technology

Waregem, Belgium—Wuxi Boda Bamboo and Wood Industry Co., Ltd. (Wuxi Boda)—in the wake of Novalis—has started the mass production of Unilin's Matte Bevel technology....

Ceramic: Differentiation via versatility

Indoors. Outdoors. Floors. Walls. Pool surrounds. Countertops. Ceramic Tile is the most versatile product in the industry with the ability to clad nearly every...

MILEstone to unveil new Stories concept at Coverings

Clarksville, Tenn.—MILEstone is set to launch the second chapter of its Stories concept at Coverings 2024. In collaboration with Michele McMinn, Gresham Smith Studio...

Amorim launches Go4Cork One

Mozelos, Portugal—Amorim Cork Composites has launched Go4Cork One underlayment, which blends cork with PET foam from recycled wind turbine blades. Underlayment One is the...
Some text some message..
X