
Hazelton, Pa.—Hear the name Forbo and the first thing that comes to mind is linoleum—and for good reason. The Swiss-based company, through its Marmoleum brand, is the world’s largest producer of linoleum with manufacturing facilities in the Netherlands and the UK. But when Forbo took the wraps off its brand-spanking new, $40 million manufacturing facility on May 5, the product coming off the line was very different from the material that is synonymous with the company that will celebrate its 100th anniversary in 2028.
Forbo’s first domestic manufacturing facility was erected to produce Flotex, a highly durable, hygienic, and waterproof textile flooring, which is soil and stain resistant, slip-resistant and acoustic. Its unique construction features 46,000 dense, upright nylon fibers per square inch, making it applicable for both commercial and residential use due to its low maintenance and cleanability.
On the surface, Flotex has been around for more than 50 years, competing in the high-performance carpet category with products like Powerbond. But according to Denis Darragh, Forbo’s vice president of North American operations, Flotex is in a league by itself, an entirely different construction of a carpet.
“We call it high-performance carpet,” he said. “Instead of your traditional tufting where a backing is punctured with yarn, Flotex’s nylon 6,6 fibers are electrostatically charged and embedded upright into a solid adhesive bed through a flocking process. There are no punctures. The result is a product that is impermeable from the top and bottom. Other products in this category are impermeable from the bottom, but not from the top.”
The flocked construction also lends itself to cleanability. “A yarn construction entraps dirt and stains,” Darragh explained. “Carpet is made from yarns, which are just fibers with different twists, creating trap points for dirt and stains that you can’t access and are meant to hide dirt, whereas Flotex’s upright fibers allow dirt and soil to easily be removed and cleaned. This construction has roughly 46,000 individual fibers embedded per square inch, so it is extremely high density. It’s a 10-step process where the density is increased at each step.”
Darragh said the issue with other products in this category is liquids and soiling can get trapped in the nap and backing, making it difficult to remove stains. And other products may use a cheaper, tightly woven residential fiber instead of the high durability of nylon 6,6, so there can be mid-to-long term performance issues.
Flotex’s value proposition centers around HCD—healthy, cleanable, durable—as it keeps a spill or dirt on the surface, unlike competing products. “Keeping everything on the surface means it is healthy because it is cleaner, and you get durability because eventually abrasion wears down traditional carpet, resulting in crushing, matting and everything else. Flotex eliminates those two variables, but it all comes down to the construction. You don’t have loops, you don’t have penetration, you have the best quality fiber you can buy. You can clean the fiber individually; it’s not like trying to clean a yarn. So healthy, cleanable, durable.”
Darragh sees many applications for Flotex, such as K-12 and higher education, particularly student life and athletics. “It’s the perfect solution for higher education dorm rooms as well as senior care,” he said. With the latter, there is no need to do room turns. “Usually when a room becomes vacant, they’ll rip out the old carpet and put in new. With Flotex, they don’t have to get into that cycle of ripping out and replacing because a room installed with Flotex can be cleaned.”
However, the area where Forbo is currently seeing the greatest growth is public spaces. “We’re talking convention centers, airports and sports arenas because it doesn’t wear out,” he said. “Flotex is an owner-occupied space product. It’s not that low, first-cost product. The economic advantage is life cycle cost. If you own the space, you are going to want Flotex because you will never have to replace it.” Recently completed airport renovation projects with Flotex include Dallas Love Field in Texas and Punta Gorda in Florida.
Darragh believes Flotex is a better solution over LVT for spaces where water can be an issue because it is non-slip, wet or dry. “We started getting specified for the produce section in grocery stores, because it eliminates slip and fall risk, which is a big issue in retail if you get water on the floor,” he said. “Also, it’s low maintenance. You vacuum and then periodically if it gets dirty or stained, you can use an extraction method.” He added it installs just as easily as LVT.
Flotex, available in sheet goods, 20 x 20 tiles and top-selling 10 x 40 planks, retails between $6 and $7 a foot, about double the price of LVT. But it is not more expensive in the long run. “The lifecycle cost makes it lower cost,” he said. “We have a 30-year warranty.”

History
Flotex in its current form has evolved over the years. The construction has been around for more than 65 years. By the 1970s and into the ’80s, a U.K.-based company, Bonar Floors, became its largest producer. Forbo acquired Bonar Floors in 2008.
According to Darragh, Flotex was always incredibly durable, but its aesthetics were limited in scope because of its traditional rotogravure printing process. “The product was very dark, very heavy,” Darragh said. “The end user almost had to accept the visual to get the performance they wanted. It was not an A&D product; it was an end-user product.”
The development of digital printing changed the game. “We started with the digital print modular products about 10 years ago,” Darragh said. The result: Today, Flotex is about a $100 million business globally with sales growing in North America about 15% to 20% a year “in the more normalized years.”
That growth is what propelled Forbo to build its plant here. Up until now the product was made in the UK or France. “Flotex is becoming a growth pillar of our global strategy,” Darragh said. “Prior to 2008, we were basically a resilient manufacturer. Now, we recognize the opportunities carpet creates for us, particularly in a targeted sense.”
The new facility gives Forbo flexibility in terms of design, customization “and all the other things that are part of that fashion element of carpet,” Darragh said. “It also allows us to meet the service profile. We are two to four weeks delivery in any pattern, any quantity. That is our service commitment. You could never do that from overseas. You have six weeks in transport alone. That’s why this made sense. It was service. It was tailoring to the North American eye and the service parameter you need to compete in the world’s largest carpet marketplace.”
The customization component will be important, particularly for schools. “In higher education, for example, you can add an accent stripe into any design using the school colors, we can do that all the time,” he said. “If you want a logo or the school emblem in the middle of the locker room, we have that capability.”
The final benefit this new facility affords is the ability for Flotex modular products to qualify under the Build America, Buy America Act initiative, which requires all iron, steel, construction materials and manufactured products used in federally funded infrastructure projects to be produced in the United States.
“Depending on the project, there’s either a 55% U.S. content criteria or 65% U.S. content criteria,” Darragh said. “Our sheet goods meet the 55%. The modular products meet the 65% criteria. In 2029, that criteria will increase to 75% and by then we expect to meet that. Airport or convention center projects get public funding. They want that certification so they can qualify for government funding. This opens up tremendous opportunities for Flotex.”
